Specifications



Only For Qualied Installers

Remove pilot tower
with a 7/16” wrench.
Replace LP orice with
Natural Gas orice. See
instructions in kit.
Use a 1/2” deep well
socket to remove the LP
#53 orice and replace
with the #37 Natural gas
orice from the kit.
 
NG Conversion label
NG Orice #37
NG Valve
Conversion
Module
NG Conversion
Instructions
This kit is only for use in the Conquest direct
vent gas stove.

NG Pilot Orice
Remove the three screws that hold the
LP knob module in place. Remove the
module and replace with the Natural
gas module from the kit. See kit
instructions.

2
4
Remove four
bolts and
remove burner
module from
stove.
