Installation guide

Page 6
L-Series DF Gas Fireplace
Part No. XG0180
f i r e f e a t u r e
Installation
Converting to Top Vent/ Rear Vent
L-Series DF Top Vent
Use the following instructions to convert an L-Series DF for Top Vent
use:
Install the 5" inner ue cap on the rear ue outlet and secure the
cap in place with ve screws, as shown in gure 7a.
Install the 8" outer ue cap on the rear ue outlet, and secure it
with ve screws, as shown in gure 7a.
1.
2.
Install the ue gasket material and ue cover plate on the rear vent
outlet . Fasten the plate with four screws, as illustrated below.
Install the 5" inner ue collar and the 8" outer ue collar in place
on the top vent outlet using 5 screws, as illustrated below.
3.
4.
Figure 7a. Flue cap installation for Top Vented fireplace.
Figure 7b. Flue collar installation for Top Vented fireplace.
Figure 8a. Flue cap installation for Rear Vented fireplace.
Figure 8b. Flue collar installation for Rear Vented fireplace.
L-Series DF Rear Vent
Use the following instructions to convert an L-Series DF for Rear Vent
use:
Install the 5" inner ue cap on the top ue outlet and secure the
cap in place with ve screws, as shown in gure 8a.
Install the 8" outer ue cap on the top ue outlet, and secure it
with ve screws, as shown in gure 8a.
1.
2.
Install the ue gasket material and ue cover plate on the top
vent outlet. Fasten the plate with four screws, as illustrated in
gure 8b.
Install the 5" inner ue collar and the 8" outer ue collar in place
on the rear vent outlet using 5 screws, as illustrated below.
3.
4.
5” Inner Flue Cap
8” Outer Flue Cap
5” Inner ue CapFl
Fl8”
Outer
ue Cap
5” Inner Flue Collar
8” Outer Flue Collar
8” Outer Flue Collar
5” Inner Flue Collar