Owner`s manual


L42DF* Indoor Gas Fireplace
XG0181 - 112811.1
Installation

Frame in the enclosure for the unit with framing materials. The framed
opening for the assembled replace is 42" wide, x 37" high x 22⅝"
deep, see 
 When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. SeeFigure 23
 Framing dimensions, Straight wall.
* When sheetrock is not
used behind the replace,
framing depth 22⅝" may be
reduced by 5/8".
 Combustible Framing for shelf over the replace, Top vent.
Combustible Framing for Rear Vent with shelf above the
replace. Note: Straight through the wall rear vent available for
Natural Gas only.
Combustible Framing for Rear Vent, with shelf above replace.
 Non Combustible Framing for Top Vent or Rear Vent, with
alcove. Note: Straight through the wall rear vent available for
Natural Gas only.
2” Min
12”
Max.
N.G.
39”
Combustible Header,
with Supplied shield.
Combustible
Shelf
10”
REAR VENT
N.G. ONLY
1” Min
39”
Combustible Header,
with Supplied shield.
Combustible
Shelf
10”
1” Min
L.P. & N.G
33”
Non-Combustible
materials. Alcove
over fireplace.
M
in.
12”
door
opening
3”
Rear
Vent
Ceiling
Floor
Top Vent
N.
G
.
&
L.P.
12”
max.
1”
min.
header
REAR VENT
N.G ONLY
Non-combustible
Min 1”
84”
Combustible Header,
with Supplied shield.
Combustible Shelf
40 1/2”
21”
PEL
Short
90 elbow
N.G. & L.P .
2” Min
37”
Minimum Corner framing dimensions
84 7
/8”
0" clearance
to corners only
42”
60 5/8”
42”
37”
*22
5/8”