Owner`s manual


L42DF* Indoor Gas Fireplace
XG0181 -112811.1
Installation
Corner installation.
 Flex installation. (NG Models Only)

Attach an PEL-45 (45° elbow) directly onto the ue collar. Cut the PXT-
20 to suit, and attach it to the PEL-45. Slide the replace into position
and attach to the termination.
 
Use an PTO-4 termination and an PFL-1 or PFL-2/PFL-2 (12" or
24" compressed length) and a frame, if appropriate.Flex may be
turned to obtain desired degree of angle required but must not
exceed 45°.
 
The Kit includes a heat
shield, a PFL-12 (f/f) exible pipe, and a termination with or without
a mounting frame.
PEL-45 Elbow
PEL-90 Elbow
PXT-18