Owner`s manual
XG0147 - 011912.1
Installation
Optional Cultured Rocks
The has the option of installing the cultured rocks which mimic
real stone. These may be spaced at random or in a visual pattern of your
preference in the burner tray. See the Montigo web site for photographs
and ideas. www.montigo.com
The has the option of a burner cover kit. To install the
restones with the burner cover kit, remove the Door as shown on page
21. Follow these instructions to ensure all parts are removed or replaced
as required. Once the glass door is removed place the burner covers
and place restones randomly across the pan and the burner covers as
described in Figure 27 to 27b.
. Installation of the Optional burner covers ,
(Place the covers end to end; do not overlap).
Fill pan with restones.
. Ensure ONLY one layer of restones cover the
burner and no restones cover the pilot.
. Spread the restones evenly .
is supplied with restones. Remove the Door
as shown on page 21. Follow these instructions to ensure all parts
are removed or replaced as required. Once the glass door is removed
place the restones randomly across the pan as described in Figure
26 to 26a.
.
. Completed restone installation.
(Note: DO NOT place ANY restones on top of the burners or pilot).
. Operating gas replace with restones surrounding
burner tray.
CAUTION!
DO NOT COVER THE BURNERS or PILOT
CAUTION!
have the option of installing a
burner cover kit. Only conceal burner covers with one layer of
restones, or excessive sooting may result.
Ensure the restones
The restones will get hot while replace is in operation and
should not be handled until cool.










