Owner`s manual



XG0147 - 011912.1



Installation

 which employ the fans must be grounded in

accordance with local codes or, in the absence of local codes, with the

National Electrical Code, 

For more information see the  included with

the fan kit.

NOTE:

If any of the original wire supplied with the appliance

is replaced, it must be replaced with the same type,

or its equivalent.

 Wiring diagram for optional fans.

L2-WH

L1-BLK

p g

Quick Connect

lu to motor

5/1/60 Supply

G L1 L2

optional

All replaces may be equipped with optional fan kits for circulating

heat into the living space.

  which employ the fans must be electrically

grounded in accordance with   Canadian Electrical Code

Part 1 and/or Local Codes.



The * gas valve may be connected to a wall switch. Do 

connect any external power to the remote switch. The valve will

generate its own power on a millivolt circuit or will draw its power from

an AC Connection inside the replace, depending on the model of the

unit. Use only low voltage wire, and connect any external

power to the remote switch.

Refer to for wiring requirements.

 The switch location must not exceed 30' from the replace.