Owner`s manual

Page 20

H(L)38DF-PRC Indoor Panorama Gas Fireplace

Part No. XG0211 - 080510

Installation

Installing Firestones in N.G. (Natural Gas) Fireplaces

The H*38PR* is supplied with restones. Remove the Door and trim

as shown in the previous Instruction. Follow these instructions to

ensure all parts are removed or replaced as required. Once the Trim

and glass doors are removed place the restones randomly across

the pan and the burners as described in Figure 28 to 28b.

Note: (N.G.) Natural Gas models, Only cover the Optional

burner covers with one layer of designer restones.

Figure 28. Installation of the Optional burner covers , (Place the cov-

ers end to end; do not overlap).

Figure 28a. Installation of the restones. (Ensure ONLY one layer of

restones cover the burner and pilot covers).

Figure 28b. Spreading the restones evenly .

Installing Firestones in L.P. (Propane) Fireplaces

Propane H*38PR* Fireplaces, has the option of installing the op-

tional cultured rocks or restones. As described below, the restones

or cultured rocks cannot cover the burners. Doing so produces an

undesireable / uneven ame pattern, and eventual sooting. Figure 29

to 29a.

Note: (LP gas) Ensure the optional river rocks or designer

restones do not cover the Burners.

Figure 28c. Completed restone installation.

Figure 29. Completed restone installation. (Note: DO NOT place

ANY restones on top of the burners).

Figure 29a. Operating Propane gas replace with restones sur-

rounding burner tray.

Optional River Rocks

The H*38PR* has the option of installing the cultured rocks which

mimic real stone. These may be spaced at random, or in a visual

pattern of your preference. See the Montigo web site for photographs

and ideas.