Owner`s manual

H*38DF PRC Panorama Indoor Gas Fireplace
Page 6
XG0211 - 040912.1
Installation
Section 2: Framing
1). Frame in the enclosure for the unit with framing materials. The
framed opening for the assembled replace is 40 3/4" wide, x 44"
high x 24 1/2" deep, see Figure 2 .
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. See Figure 21.
Figure 2. Framing dimensions.
24 1/2”
40 3/4”
44”
Figure 3. Combustible Framing for shelves over the replace, Rear vent.
Note: HP38DF* CANNOT be straight run rear vented with wall termination.
Figure 4. Combustible Framing for shelves over the replace, Top vent.
‡ HP38DF* is 59"
Figure 5. Non Combustible Framing with alcove above replace, Top Vent.
11”
29
C
ombustible
Framing Header
shelf
33 1/2”
44”
1” Min.
12” Max.
46” ‡
17 1/2”
MEL Short
90 elbow
shelf
Combustible
Framing / Header
44”
1 Min.”
Floor
39 5/8”
door
opening
44”
C
ombustible
Header
Min. 1 ”
2”
Ceiling level
Non-Combustible
Header
Non-Combustible
materials. Alcove
over fireplace.
Top Vent
Non-Combustible
Materials, with Low
profile mantel / Alcove
over fireplace.
84”
Min.