OWNER'S MANUAL 1-DOOR WALL CABINET MG30201WC www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized. Thank you for your purchase of this Montezuma 1-Door Wall Cabinet. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME.
SPECIFICATIONS 1-DOOR WALL CABINET MG30201WC OVERALL DIMENSIONS: 30-1/2" W x 12" D x 20-1/8" H (77.6 cm W x 30.5 cm D x 51 cm H) NET WEIGHT: 28.7 lb (13 kg) MAXIMUM SHELF WEIGHT CAPACITY: 50 lb (23 kg) You can attach this wall cabinet to a base cabinet using the pegboard back wall and post combination. Base cabinets and pegboard back walls are sold separately. The following units are available: 4-Drawer Base Cabinet MG30244BC 2-Door Base Cabinet MG30242BC Pegboard Back Wall and Posts MGBWC01 Visit www.
PARTS LIST 9 1 8 7 1 2 xxx 6 3 The keys are taped inside the cabinet. 5 4 REF DESCRIPTION PART NUMBER QTY 1 M6 x 16 Hex Socket Head Screw 320327 20 2 Gas Strut 303002 2 3 End Cover 314195 2 4 Shelf Support 226078 4 5 Shelf 233955 1 6 Lock and Key 304178 1 7 M6 Hex Flange Nut 323085 1 8 M6 x 65 Hex Tapping Screw 320316 3 9 Washer 324050 3 To order replacement parts, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST).
20 2 M6 x 16 Hex Socket Head Screw 8 for attaching top panel Gas Strut 11 for attaching bottom panel Pre-installed 1 for attaching unit to other units For opening door 2 1 4 For covering holes for attaching to other units, if not in use Shelf Shelf Support For placing at desired height For supporting adjustable shelf 1 1 3 M6 Hex Flange Nut M6 x 65 Hex Tapping Screw xxx End Cover Lock and Key For securing your valuables For use with M6 x 16 hex Socket Head Screw when attaching unit t
ASSEMBLY Visit www.montezumastorage.com to watch the how-to video. Carefully separate the front and back panels, allowing the side panels to unfold completely. Make sure the unit is upside down. Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down. Make sure the holes are aligned.
Attach the bottom panel using eleven M6 x 16 hex socket head screws.
Turn the cabinet back to the upright position. Attach the top panel using eight M6 x 16 hex socket head screws.
Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports. If you have purchased a pegboard back wall, posts and base cabinet, refer to the owner's manual for the pegboard back wall and posts for how to install your wall cabinet on your base cabinet.
INSTALLATION If you have purchased other units, assemble them now, then put all units together to build your garage. For a better appearance, attach units together using a M6 x 16 hex socket head screw and M6 hex flange nut. Holes are located at the top front side of each unit.
Hide holes on the exterior ends of the units with the supplied end covers, if necessary.
For safety, secure the tops of the each unit to the wall using three M6 x 65 hex tapping screws and washers. For best results, mount to studs or other solid surfaces. Do not mount to drywall as it will not support the required weight and poses a danger if mounted incorrectly.
MAINTENANCE Periodically clean the door fronts, trim, and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY Use two people to move the units into place. Failure to do so can result in back or other injuries. DO NOT leave children unattended near the garage storage system. DO NOT alter this product in any manner. For example, do not weld external lock bars or attach electrical equipment.
This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL, USA 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
