Instructions / Assembly

INSTRUCTION MANUAL
4
TOOLS REQUIRED FOR ASSEMBLY
10 mm and 14 mm Sockets
Extension Ratchet
CABINET HANDLE INSTALLATION
NOTE: Assemble the handle rst to make it easier
to move the cabinet.
Position the handle over the holes in the cabinet
and attach with the M6 x 12 mm hex bolts provided.
Tighten securely using a 10 mm socket.
CASTER INSTALLATION
CAUTION: Two or more people are required to lay
down or stand up the cabinet. Use the side handles
for assistance. DO NOT stand in front of or behind
the product during this process. Lock drawers before
proceeding.
Carefully lay the cabinet on its back, with a soft mat
underneath for protection.
Position the two swivel casters on the cabinet bottom,
on the same side as the handle. Insert four
M8 x 20 mm hex bolts through washers, then through
each caster and into the bottom of the cabinet. Tighten
securely.
Repeat for the two swivel casters in the middle of the
cabinet and the two rigid casters on the other side of
the cabinet.
CHEST AND CABINET CONNECTION
Remove the work top from the cabinet. Place the chest
on the cabinet. Attach the connectors to the chest,
making sure the hook head snaps in the square hole
on the back of the chest. Fasten the
M6 x 12 hex bolts to the cabinet.