Instructions / Assembly

Installation

MONTEAUX LIGHTING

™

Please contact 1-800-446-9092 for further assistance.

Attaching the mounting unit to the

junction box

 Attach the mounting unit (AA) to the junction box (not

included) with mounting screws (BB).

NOTE: The pre-installed support screwson the

mounting bracket (AA) should protrude outaway

from the junction box.

Making the electrical connections

 Connect the copper wire from the light ﬁxture (A) to the

mounting unit (AA) by securing it with the pre-installed

ground screw.

 Connect the black to black (power), the white to white

(neutral), and copper wire to ground wire with the wire

nuts(CC) and secure the wire nuts (CC) with electrical

tape (not included).

NOTE: If the wires from the ﬁxture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

Securing the light ﬁxture to the

junction box

 Secure the light ﬁxture (A) to the junction box by placing it

over the pre-installed screws on the mounting bracket (AA)

and securing it with the cap nuts (DD).

NOTE: Maintain a tight waterproof seal between the

canopy and mounting surface.

DD EE

Assembling the light ﬁxture

 Secure the glass shade (B) to the light ﬁxture (A) with the

lock ring (C) and the socket cover (D).