Instructions / Assembly

F
Installation
5
MONTEAUX LIGHTING
™
Please contact 1-800-446-9092 for further assistance.
2
Attaching the mounting unit and
canopy to the junction box
 Attach the mounting unit (AA) to the junction box (not
included) with the mounting screws (BB) and remove the
pre-installed screw collar ring.
 Place the canopy (F) over the pre-installed screw collar loop
on the mounting unit (AA). Screw on previously removed
screw collar ring until 1/2 of the screw collar loop threads
are exposed.
 Secure the chain (E) to the screw collar loop on the mount-
ing unit (AA).
 Unscrew the screw collar ring and lower the canopy (F) over
the chain (E). Weave the electrical wires and ground wires
through the chain (E), screw collar loop, canopy (F) and
through the center of the mounting unit (AA).
AA
BB
1
Assembling the light fixture
E
AA
 Secure the glass shade (B) to the light fixture (A) with the
lock ring (C) and the socket cover (D).
 Screw in the loop (G) to the top of the light fixture (A).
 Secure the chain (E) to the loop (G) on the light fixture (A).
NOTE: Ensure the quick connector is fully closed
when installing the chain.
F
E
NOTE: Ensure the quick connector is fully closed
when installing the chain.
B
C
D
A
G
E
NOTE: Maintain a tight waterproof seal between the
canopy and mounting surface.