Instructions / Assembly

Please contact 1-800-446-9092 for further assistance.

MONTEAUX LIGHTING

™

Installation

Attaching the mounting unit to the

junction box

 Attach the mounting unit (AA) to the junction box (not

included) with mounting screws (BB).

 Secure the light ﬁxture (A) to the junction box by placing it

over the mounting unit (AA) and securing it with the set

screws (DD).

NOTE: The pre-installed support screwson the

mounting unit (AA) should protrude outaway

from the junction box.

Making the electrical connections

 Connect the copper wire from the light ﬁxture (A) to the

mounting unit (AA) by securing it with the pre-installed

ground screw.

 Connect the black to black (power), the white to white

(neutral), and copper wire to ground wire and secure the

wire nuts (CC) with electrical tape (not included).

NOTE: If the wires from the ﬁxture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

Securing the light ﬁxture to the

junction box

NOTE: Maintain a tight waterproof seal between the

canopy and mounting surface.

Installing the light bulb

 Install two E12 candelabra 60-watt bulbs (not included).