Instructions / Assembly

Installation
5
MONTEAUX LIGHTING
™
Please contact 1-800-446-9092 for further assistance.
1
Attaching the mounting unit to the
junction box
 Remove the preinstalled set screws (DD) from the mounting
unit (AA) and place them in a safe location.
 Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
2
Making the electrical connections
 Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
 Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire
nuts(CC) and secure the wire nuts (CC) with electrical
tape (not included).
NOTE: If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
CC
3
Securing the light fixture to the
junction box
BB
AA
AA
DD
A
DD
 Secure the light fixture (A) to the junction box by placing
over mounting unit (AA) and securing it with the set screws (DD).