Installation Guide

Customer Service

800-969-3347

Customer Service Center

7400 Linder Ave.

Skokie, IL 60077

www.montecarlofans.com

MCM360 BLANKING PLATE

READ AND SAVE THESE INSTRUCTIONS

Warning: Make sure main power is turned off before handling Parts

replacement.

Installation work and electrical wiring must be done by qualified person(s). If you

are unfamiliar with methods of installing or electrical wiring, secure the service of a

qualified electrician.

All electrical connections must be in accordance with local codes, ordinances, and

national electrical codes.

Review the installation instructions supplied with your fan. Make sure that your fan

has been installed and wired properly.

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver,

Pliers, Safety Glasses, Stepladder and Wire Strippers

PAGE 1
MCM360 BLANKING PLATE READ AND SAVE THESE INSTRUCTIONS Warning: Make sure main power is turned off before handling Parts replacement. Installation work and electrical wiring must be done by qualified person(s). If you are unfamiliar with methods of installing or electrical wiring, secure the service of a qualified electrician. All electrical connections must be in accordance with local codes, ordinances, and national electrical codes. Review the installation instructions supplied with your fan.
PAGE 2
1 2 ON ON OFF OFF 3 Glass Before you begin handling light kit replacement, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 4 Remove glass from light pan by turning counterclockwise. Remove LED light fixture by uninstalling the 3 set screws and turning counterclockwise.
PAGE 3
Jun.