Instructions / Assembly

GENERAL INSTALLATON
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Remove set screws from switch housing.
Keep screws.
Switch housing may be different than
shown.
Unplug (If wiring with plugs) and remove
the switch housing from fan.
Remove tap from bottom of switch housing.
Thread lead wires from light fixture through
central hole in switch housing and then
install switch housing onto light fixture by
turning clockwise till tight.
Place lock washer and hex nut provided
over lead wires from light fixture and tighten
securely with the thread rod of light fixture.
Align and thread the pull chain from switch
housing through the pull chain guide on light
fixture as shown in inset.
Connect white wire from light fixture
with white wire from switch housing
(or fan) and then connect black wire
from light fixture with black (or blue)
wire from switch housing (or fan).
Lift light fixture assembly up, connect
the plug from fan to the plug from
light kit assembly. Make sure the
plugs are clasped firmly.
Install light kit assembly (switch
housing) onto the fan with set screws
removed in step 2.
Align and thread the pull chain from switch
housing (or fan) through the pull chain guide
on light fixture as shown in inset.
Install 3 x 40 watt candelabra base bulbs,
Bulbs included. WARNING: Over lamping the
fan will result in the fan lights shutting down
until the proper wattage of bulbs are
installed. Reset the lights by turning off the
wall switch, breaker,or by remote. Replace
bulbs with the correct wattage bulbs, turn
the power on.
Caution: Do not replace bulb until it cools
down.
ON
OFF
ON
OFF
Show different types of plug
Switch housing, plugs may be
different than shown
Switch housing
Switch
housing
Light fixture
3
© 2014 Monte Carlo Fan Company
2/6/2014
1
2 3
4
5
6
7 8
9
Tap