Installation Guide

Install the switch housing cover with light
kit to the fan by screwing the three side
mount screws.

Thread electrical cord through the
top pipe and out through the hickey.
Thread ground strap through the
hickey upward through the top pipe.

Make wire connections to lamp cord.
Black from fixture to ribbed side of
lamp cord., white from fixture to non
ribbed side of lamp cord.

Chandelier Mount
Install longer threaded pipe from
hardware pack to mounting strap as
shown.

Install mounting bar to outlet box in
the ceiling using screws provided.
Make sure that the heads of the
screws installed in the previous step
are facing into the outlet box.

L
ocate blue and white wire from the fan
m
arked “for light kit”. Connect blue from fan to
black from light kit and white from fan to white
from light kit by pushing connectors together.
Note: If your fan does not have plugs they may
b
e cut as shown on figure “B” on page 2.

Install hickey as shown in photo and
illustration.

Cut plugs from ends of leads as in
Fig. B on page 2.

nut
nut
hickey
lock
washer
ground
strap
lock
washer
nut
hickey
ground
strap
nut
electrical
cord
electrical
cord