Instructions / Assembly

6
© 2018 Monte Carlo Fan Company
10/2018
16 17 18
19 20
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Place light pan over the lead wires and
attach it onto the plate on motor, aligning
the keyhole slots on the light pan with the
preassembled screws on the plate. Twist
clockwise till lock.
Loosen 2 and remove 1 preassembled
screw from the light pan. Save screws for
later use.
Connect light lead wires from fan to the
lead wires from LED light fixture with
quick connectors. Make sure the quick
connectors are firmly clasped.
Glass
Light pan
Light pan
Plate on motor
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw removed in step 17.
Tighten all screws securely.
Attach glass to light pan by locating
dimples in light pan with grooves in glass
and twist clockwise until tight.
LED light fixture