Instructions / Assembly

4
© 2014 Monte Carlo Fan Company
12/2017
7 8 9
10 11 12
Place receiver in position as shown.
Remove set screws from mounting bar
with allen wrench provided.
Lift motor assembly, aligning the
mounting bar with the slots on mounting
plate, and twist clockwise till lock.
Align the holes on mounting plate with
the screw holes in mounting bar.
Reinstall the screws removed in step 7.
Tighten all screws securely.
Remove set screws from mounting plate.
Keep screws.
Lift fan housing up, aligning the holes on
housing with the holes on mounting
plate.
Reinstall the set screws remove in step 10.
Remove the gasket.
Align the holes of blade bracket, blade
and the top plate of blade bracket.
Install blade bracket with blade and top
plate by 3 blade screws provided. Tighten
screws securely. Repeat this process for
remaining blades.
Mounting bar
Slot
Gasket
Blade bracket
Blade
Top plate
Mounting
bar
Mounting
plate
Receiver