Instructions / Assembly

6
© 2016 Monte Carlo Fan Company
11/2016
18
19
20
21
Remove 3 set screws from side of light
pan. Keep screws
Attach LED light kit to light pan, aligning
the holes on LED light kit with the holes
on light pan. Reinstall the set screws
removed in step 18. Tighten screws
securely.
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to blue wire from LED light
kit.
Note: If you don’t want to install the
fan with LED light, go to step 21 for
blanking plate installation.
Align the threaded rod in blanking plate
with the screw hole in light pan and Install
it by turning clockwise till tight.
Install blanking plate
Light pan
Install LED Light Kit
LED light kit
Blanking plate
Light pan
Threaded rod