Installation Guide

7
1/2021
24 25 26
© 2021 Monte Carlo Fan Collections
Install Blanking Plate
Attach LED light fixture onto the light pan,
aligning the holes on the LED light fixture
with the screw holes on light pan.
Reinstall the screws removed in step 21.
Tighten all screws securely.
Isolate the quick connects with electrical
tape.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note: Do not install LED light kit if
use blanking plate.
Attach lexan shade by locating dimples in
light pan with grooves on the Lexan
shade and twist clockwise until tight.
Lexan shade