Instructions / Assembly

© 2013 Monte Carlo Fan Company
6/25/2013
3
Remove keeper from pin and pin
from downrod. Place keeper back on
pin and save for later.
5
Loosen the 2 set screws till you can
not feel them on inside of yoke.
4
Place canopy on downrod. (as shown)
6
B
efore you begin installing the fan, Switch
power off at Service panel and lock service dis-
c
onnecting means to prevent power from being
switched on accidentally. When the service dis-
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Before installing this fan make sure the outlet
box is properly installed to the house structure.
T
o reduce the risk of fire, electric shock, or per-
sonal injury, mount to outlet box or supporting
s
ystem acceptable for fan support. (Mounting
must support at least 35 lbs.)
Use metal outlet box suitable for fan support
(must support 35 lbs). Before attaching fan to
outlet box, ensure the outlet box is securley
f
astened by at least two points to a structural
c
eiling member ( a loose box will cause the fan
to wabble). Use only the screws provided
with the outlet box.
3
21
Place downrod into fan yoke.
9
Thread leadwires and safety cable
through downrod. (as shown)
8
Place yoke cover on downrod. (as
shown)
7