Instructions / Assembly

7
© 2014 Monte Carlo Fan Company
12/2017
22 23 24
25 26
Attach light plate onto the plate on motor,
aligning its keyhole slots with the
preassembled set screws on the plate and
twist clockwise till lock. Reinstall the
screw removed in step 21. Tighten all
screws securely.
Connect white wire from fan to white wire
from light fixture, and then connect blue
(or black) wire from fan to blue (or black)
wire from light fixture.
Attach light fixture onto the light plate,
aligning keyhole slots on the light fixture
with the preassembled set screws on
light plate and twist clockwise until lock.
Reinstall the screw removed in step 23.
Tighten all screws securely.
Place glass over glass fixed ring, aligning
the thread on light fixture and attach it
onto light fixture by turning clockwise till
tight.
Loosen 2 and remove 1 preassembled set
screws from the light plate. Save screw for
later use.
Light plate
Glass
Glass holder
Light fixture