Instructions / Assembly

5
© 2019 Monte Carlo Fan Company
8/2019
11 12 13
14 15 16
Switch housing
Lift Canopy, allowing the 2 studs to
protrude through the canopy.
Install knurled nuts provided and tighten
the knurled nuts securely. The canopy
should adjust for any irregularity in the
ceiling or outlet box.
Make sure the studs protruding from the
bottom of the Mounting bracket are
installed with threads all the way through
the bracket.
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Remove set screws from top cover of
switch housing. Keep screws.
Install witch housing, aligning the holes on
switch housing with screw holes on top
cover. Reinstall the set screws removed
in installation step 15.
Install blade bracket with blade and top
plate as shown above by 3 blade screws
provided. Tighten screws securely.
Repeat this process for remaining blades.
Stud
Blade bracket
Top plate
Blade
Shipping
stabilizers