OWNER’S MANUAL Ceiling Fan Installation Instructions Total fan weight For 5DI52 Series Fans READ AND SAVE THESE INSTRUCTIONS QUALITY CEILING FANS
Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999), including fire-rated construction. 2. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer. 3.
9 7 8 Place downrod into fan yoke. Align the hole in the Downrod with the hole in the Yoke. Insert the Pin through the Yoke and Downrod until the point appears on the other side. 10 11 Install the keeper to pin. 12 Safety cable installation Safety Cable Lag Screw safety cable washer 3” lag screw Tighten the 2 set screws on the yoke once the downrod is in place. 13 Hang assembled fan from the mounting bracket installed to ceiling in previous step. Make sure the fan is hanging straight.
19 20 Install by twisting clockwise, add 1 screw removed step 18 to switch housing plate. Tighten the 3 screws securely. Connect plug from fan to switch house plug. 22 23 Connect white wire from fan to white wire from light fixture. Then plug blue wire from fan to black wire from light fixture. Install 3 screws to install light pan. 25 Attach glass by locating dimples in light fixture with the groves in glass and twisting clockwise till tight.
TROUBLE SHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.
