Instructions / Assembly

© 2011 Monte Carlo Fan Company
2/10/2012
3
Before you begin installing the fan, S witch
power off at Service panel and lock service dis -
connecting means to prevent power from being
switched on accidentally. When the service dis -
connecting means cannot be locked, securely
fasten a prominent warning device, such as a
tag, to the service panel.
Remove keeper from pin. Remove
pin, replace keeper and save.
1
4
Thread wire through downrod with
canopy and yoke cover assembled
onto downrod.
6
Before installing this fan make sure the outlet
box is properly installed to the house structure.
To reduce the risk of fire, electric shock, or per -
sonal injury, mount to outlet bo x or supporting
system acceptable for fan support.
(Mounting must support at least 35 lbs.)
Use metal outlet box suitable for fan support
(must support 35 lbs). Before attaching fan to
outlet box, ensure the outlet bo x is securely
fastened by at least two points to a structur al
ceiling member ( a loose bo x will cause the fan
to wobble). Use only the screws provided
with the outlet box.
3
2
Loosen the 2 set screws in y oke for
downrod to slip into yoke.
5
Insert downrod into motor yoke.
Next, insert clevis pin through y oke
and downrod.
7
9
Tighten both yoke set screws to fur-
ther secure downrod.
8
Secure with cotter pin.