Instructions / Assembly

6
© 2015 Monte Carlo Fan Company
5/10/2015
18
19
21 22 23
20
Install 2 of the screws to the side panel of
mounting bracket corresponding to the
open slotted holes on the canopy upper
rim, screws provided. Remove the all
thread studs from the lower part of the
mounting bracket.
Lift fan to mounting bracket, aligning the
“L” shape holes with the screws on the
mounting bracket. Turn the fan clockwise
to lock in position. Install the other 2
canopy mounting set screws from the
hardware pack and tighten all screws
securely.
Install blade bracket with blade by 3 blade
screws and washers provided. Tighten
screws securely. Repeat this process for
remaining blades.
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Remove the 3 set screws on top plate of
switch housing, keep screws.
Connect the plug from fan with the plug
from switch housing. Be sure plugs
connection clasp together completely.
Align the long slot on top plate with the
reverse switch on switch housing,
and
then install the switch housing onto
the top plate with the 3 set screws
removed in step 21 and tighten all
screws securely.
Blade bracket
Blade
Shipping
stabilizers
Top plate
Switch housing
Long slot
Reverse switch