Installation Guide

5
© 2017 Monte Carlo Fan Company
09/2017
13 14 15
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Setting the reverse switch in the down
position will result in downward airflow
and setting the switch in the up position
will result in upward airflow.
Note: Reverse switch must be set either
way completely. If the reverse switch is
set in the middle position, fan will not
operate.
Install pull chain to preassembled pull
chain on fan. Pull chains provided.
Shipping
stabilizers
Reverse switch
Pull chain