Installation Sheet

6
© 2021 Monte Carlo Fan Collections
8/2021
18 19
20
6
Connect the light lead wires from fan to
LED light fixture with a quick connector
as shown in the illustration.
Note: Be sure quick connector clasped
together completely.
Attach the glass by locating dimples in
light pan with grooves on the glass and
twist clockwise until tight.
Attach the LED light fixture onto the light
pan, aligning the keyhole slots on the LED
light fixture with the preassembled
screws on the light pan. Twist clockwise
till lock. Reinstall the screw removed on
the installation step 16. Tighten all
screws securely.
Note: If you don’t want to install the fan
with LED light, go to step 20 for blanking
plate installation.
Isolate the quick connects with electrical
tape.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note: Do not install LED light fixture if
use blanking plate.
17
Blanking plate
Install Blanking Plate
Blue
Black
White
Install LED Light Fixture
Glass
LED light fixture