Instructions / Assembly

6
© 2014 Monte Carlo Fan Company
12/1/2014
18
19
20
21
Connect white wire from fan to white wire
from light fixture and then connect blue
wire from fan to blue wire from light
fixture.
Note: If you don’t want to install the
fan with LED light, go to step 21 for
blanking plate installation.
Attach glass to light pan by locating
dimples in light pan with grooves in glass
and twist clockwise until tight.
Attach LED light kit onto the light pan,
aligning the keyhole slots on the LED light
kit with the preassembled screws on the
light pan. Twist clockwise till lock.
Reinstall the screw removed in step 18.
Tighten all screws securely.
Attach blanking plate to light pan by
locating dimples in light pan with grooves
in blanking plate and twist clockwise until
tight.
Light fixture
Install LED Light Kit
Install blanking plate
Blanking plate
Light pan
Glass
Light pan