Installation Guide

5
© 2014 Monte Carlo Fan Company
12/1/2014
14
15 16
17
12 13
Loosen one and remove one
preassembled screw from mounting
bracket. Save screw.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Attach light pan onto the plate on motor, Aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the screw removed in step 14. Tighten all
screws securely.
Loosen 2 and remove 1 preassembled
screw from the light pan. Save screw for
later use.
Lift canopy up, aligning its keyhole slot
with the preassembled screw on
mounting bracket and twist
counterclockwise to lock in place.
Reinstall the screw removed in step 12
and tighten all screws securely.
Mounting bracket
Canopy
Plate on motor
Light pan