Installation Guide

5
© 2015 Monte Carlo Fan Company
3/23/2015
12 13 14
15 16 17
Place blade on blade bracket and then
place top plate on blade, aligning each of
the holes as shown and install the blade
with top plate onto blade bracket with
screws provided, tighten all screws
securely. Repeat this process for
remaining blades.
Place light pan over the lead wires and
attach light pan onto the plate on motor,
aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the screw removed in step 13. Tighten all
screws securely.
Loosen 3 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to black wire from LED light
kit.
Attach LED light kit onto the light pan,
aligning the keyhole slots on the LED light
kit with the preassembled screws on the
light pan. Twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
Attach acrylic shade by locating dimples
in light pan with grooves on the acrylic
shade and twist clockwise until tight.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save screw
for later use.
LED light kit
Blue
Black
White
White
Plate on motor
Light pan
Light pan
Acrylic shade
Light pan
Blade
Blade bracket
Top
plate