Installation Guide

6
© 2020 Monte Carlo Fan Collections
12/2020
17 18 19
Remove bottom plate and top ring from
glass assembly by removing the set
screws. Keep screws.
Isolate the quick connects with electrical
tape.
Attach blanking plate assembly by
locating dimples in light pan with grooves
on the blanking plate and twist clockwise
until tight.
Note: Do not install LED light fixture if
use blanking plate.
Place the blanking plate in position and
install the bottom plate and top ring with
the set screws removed in installation
step 17.
Blanking plate assembly
Install Blanking Plate
Top ring
Bottom plate
Glass
Top ring
Bottom plate
Blanking plate
Tab