Installation Guide

5
1/2020
13 14 15
© 2020 Monte Carlo Fan Collections
Install blade onto blade bracket with a top
plate by 4 blade screws provided. Tighten
screws securely. Repeat this process for
remaining blades.
Note: Make sure the side with a mark
“This side up” is installed upward.
Firmly insert a blade bracket with blade
into the adapter. Fix the blade bracket
with set screws provided (the lone one
has to be installed at bottom side).
Tighten screws securely. Repeat this
process for remaining blade brackets.
Warning: Blade bracket must be fully
insert into the adapter, so the side set
screw will engage with the blade bracket
at the indent area.
Note: To install blade assembly on the
adapter firmly, the set screw is made a
little interference fit. It is a normal
condition.
Fully install set screws until they tightly
jams against the blade bracket.
Blade bracket
Top plate
Blade
Long set screw
Short set screw
Adapter
C H I C A G O , I L
WATTS: 40 W
This side up