Instructions / Assembly

5
© 2019 Monte Carlo Fan Company
7/2019
11 12 13
14 15
Lift Canopy, allowing the 2 studs to
protrude through the canopy.
Install knurled nuts provided and tighten
the knurled nuts securely. The canopy
should adjust for any irregularity in the
ceiling or outlet box.
Make sure the studs protruding from the
bottom of the Mounting bracket are
installed with threads all the way through
the bracket.
Install the blade assembly to motor using
the set screws provided. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Remove set screws from switch housing.
Keep screws.
Install switch housing, aligning the screw
holes on switch housing with the holes on
top cover of switch housing and reinstall
the set screws.
Install blade bracket with blade by 3
blade screws and decorative nuts
provided. Tighten screws securely.
Repeat this process for remaining blades.
Stud
Blade bracket
Blade
Switch housing
Decorative nut