Owner`s manual

active, processor controlled, bi-amped speaker system W440A
Rear panel: equalizer controls
Example 3 :
This is the suggested setting for high
level stage monitoring applications.
By reducing the audible range limits
boosting the available dynamic range
is increased.
Example 4 :
This setting attenuates the
middle frequencies in the central
voice range.
• When driving the system directly
from the input set to 'microphone'
this will result in a grater ‘presence’
or 'loudness' of the voice, but will reduce the intelligibility.
Note: this setting is not suggested when driving the system from
the line input, using the mixer’s output, because the W440A’
settings will add to the adjustment made with the mixer’s tone
controls and graphic equalizer (if present).
The desired tonal balance should be obtained with the mixer’s
controls.
Example 5 :
Further rotation of MID control will
result in a grater voice range
attenuation. The ‘voice loudness’
effect is increased, at the expense
of a reduced dynamic range.
This setting should be used at very
low levels.
13
ENGLISH