Specifications

W20

Montarbo

Introduction

Description

The 2-way bass reflex enclosure incorporates:

■

custom designed, high quality components

■

2 amplifiers:

600 W RMS (bass)

250 W RMS (mid/high)

■

2 independent processors

■

24dB/Oct electronic crossover

The bass reflex enclosure, constructed from birch plywood,

is equipped with two custom designed 10" low frequency

woofers and a 2" driver with constant directivity horn

for the mid/high frequencies, each driven by its own dedica-

ted power amplifier.

A high slope 24dB/Oct. electronic crossover and two

processors (one for each amplifier) optimize the dynamic

range and frequency response of the system, while protec-

ting the drivers from thermal and electrical overloads, re-

sulting in increased reliability and outstanding performance.

Its adaptability to various applications allows the W20A to

be used in any type of installation ensuring optimum results

to any professional requirement for sound reinforcement

and distribution.

The rear control panel is fitted with balanced inputs (male

and female XLRs + Jacks, wired in parallel), input volume

control, mid-high level control, ground-lift switch, mains

switch, mains socket with built-in fuse.

A High grade birch plywood construction, phenolic glued;

polyurethane painted.

B Constant directivity, high frequency horn (dispersion

60° x 40°) with 2" dynamic driver (featuring aluminum

flat wire voice coil, kapton former, titanium dome).

C Two 10" high efficiency woofers.

D Powder coated, perforated, steel grid.

E Tunig ports.

F Side recessed handles.

G Control and connection panel.

H Speaker stand adaptor.

Construction and components conform to the highest

professional standards for maximum reliability.

ENGLISH