Specifications

T12A / T15A active, bi-amped loudspeaker systems
Introduction
T12A and T15A may be easily installed and meet both
the musician's and the sound company's requirements.
They are the ideal choice for those who constantly work
both in large and medium venues, who require a
versatile system and who wish to expand their own PA.
The two independent MosFet amps for the high and
low frequencies, along with two active processors and
an electronic cross-over, allow to optimize the frequency
response and the sound performance even at low sound
levels, while ensuring clarity and power when higher
volume is required.
A 1" compression driver (with 2" voice coil) coupled with
a constant directivity horn (dispersion 90°H x 70°V) which
may be rotated 90°.
B Midrange 6".
C 15" woofer with neodymium magnet (3" voice coil) for
the T15A; 12" woofer with neodymium magnet (3" voice
coil) for the T12A.
D Multiply birch enclosure.
E Perforated steel grid (epoxy resin finished).
F Tuning ports.
G Transport handles.
H Control and connection panel.
I Speaker stand adaptor.
Their trapezoidal design allows them to be easily integrated
into more complex and articulate systems.
Each system, 3-way bass reflex, incorporates:
■ high quality components, custom designed on our
specifications
■ two class AB MosFet power amplifiers.
Output power: 500 Watts continuous, 670 Watts peak
(350 + 150 W continuous, 450 + 220 W peak)
■ two independent processors
■ an high slope electronic active crossover (24dB/oct.,600Hz,
Linkwitz-Riley).
Description
B
G
E
I
I
E
F
G
C
H
B
A
D
D
A
H
C
F
T15A
T12A
8
ENGLISH