User Manual

5.3 - USING THE PROGRAM

To start using the program, double click on the desktop icon.

The main program window will be displayed as in the following screen shot

(in this case the speaker's registering procedure has not jet been executed,

and the speaker’s list is empty), or like the one at following page

(in which the program has been congured with a network of speakers).

At start-up the program will search for the LD24 USB interface. If there is

no interface connected to the PC, the message window will show NoDevice.

In this case, plug in the USB

interface with an USB cable to

the PC and wait for the Search…

message to disappear.

The message window will show

Montarbo USBNet for a short time,

then Status OK.

ENGLISH