User Manual

52
4.3 - CONNECTION TO A PERSONAL COMPUTER
For this application the optional USB interface model LD2.4 is required.
With it the user may control any combination of up to 10 E616A active
speaker system.
Connect one of the DATA connectors (7) to the LD2.4 interface with an
ETHERNET CAT5 cable (with RJ45 plugs) and the USB port of the LD2.4
interface to a USB port of the Personal Computer with a USB cable
(type A-B).
Connect the other active speaker systems to the first one by means of
ETHERNET CAT5 cables, connecting the second DATA socket of the rst
speaker to a DATA port of the second speaker and so on up to the last one.
IMPORTANT: prior to connecting the LD2.4 interface to the computer, the
interface drivers must be installed in the PC, as described in the following
chapter.
ENGLISH