Operating instructions

32
Compression Spring
1. Turn off the burners.
2. Allow the broiler to cool to room tempera-
ture.
3. Remove the black ball knob by unscrewing
it (counterclockwise) from the threaded
stud.
4. Remove the chrome sleeve.
5. Remove the threaded rod.
6. Remove the spring from the tube and gear
assembly using needle nose pliers.
7. Replace the compression spring by
performing the above steps in reverse
order.
Gear with Bracket
1. Turn off the burners.
2. Allow the broiler to cool to room
temperature.
3. Raise grill to the top.
4. Remove all components of carriage position
handle.
5. Remove the two screws and nuts that hold
the gear with bracket to the vertical frame
rail.
6. Replace the gear with bracket by
performing the above steps in reverse
order.
Figure 12. Gear with Bracket