CENTER MOUNT UNIVERSAL Instruction Manual Bedienungsanleitung Mode d‘emploi
GENERAL ASSEMBLY INFO AND HOW TO PROFILE NUT HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 2
UNIVERSAL CONNECTOR M8x30 Ø8mm Slot nut M8 BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm] 35 25 8 M8x25 8 M8x35 MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 3
[dimensions in mm / different scales] No extra or spare parts listed! PARTS Ø32 25 1x Ø6 1x 1x 2x M 5 2x 5 1x 12 2x 5 1x black 14 MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 4
ASSEMBLY slot nut 2x M5 MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 5
serrated locking plate A 2x M5x12 serrated locking plate B 2x M5x14 flat head black MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 6
conical thrust spring knob M6 Loosen knob to adjust angle.
ASSEMBLING A VIRPIL BUTTON BOX [dimensions in mm / different scales] No extra or spare parts listed! PARTS 1x 2x 6,4 18 4x 5 4x 16 Ø5,5 15 6 2x 10 washers Ø16 M6x10 MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 8
washers Ø15 M5x16 MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 9
Assembly example MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 10
ASSEMBLING A TOTAL CONTROLS BUTTONBOX [dimensions in mm / different scales] No extra or spare parts listed! PARTS 1x 2x 2x M8 8,4 16 4x 4x 8 2x M5 5,3 10 black 20 5 4x 16 washers Ø16 M8 nuts 40 m m M8x20 flat head black MTSIM CENTER MOUNT UNIVERSAL INSTRUCTION MANUAL 11
4x nut M5 4x washer Ø10 4x M5x16 14-07-2022
WARNING NOTICES CAUTION! Check before usage if all screws are tightened. CAUTION! Check before usage that the mounting plate is screwed on tight after making height adjustments. DANGER: Contains small parts not suitable for children under 3 years. Only suitable for children over 12 years and adults. All MTSIM products are hand assembled and quality checked. The mount is designed for usage only with a computer controller (f.e. joystick or throttle).
