Specifications
sales@ripmax.com
Radio Systems & Accessories
37
• 4 Wheel Steering
• MC Link
• CPS-1 Mixing
• ABS
• Lap & Normal Timer
Length: 69mm
Width: 79mm
Height: 12mm
Weight: 15.4g
Connector: USB
USB connector for easy use
Sprung clip to mount
£27.50
Futaba SBS/01RB Telemetry Sensor
Part Number: P-SBS/01RB
Length: 480mm Unit Dimensions: 39 x 10 x 5mm
Weight: 3.8g
This new sensor allows the rpm of brushless motors to
be measured and then displayed either on the transmitter
screen or on a phone/tablet with the use of the TMA-1 unit.
A wide rpm range is covered, with the minimum being 360
and the maximum 300,000, whilst the sensor simply plugs
into the S-Bus2 port of a suitable Futaba receiver.
£109.99
Futaba TMA-1 Telemetry Adaptor
Part Number: P-TMA-1
This new telemetry monitor adapter is a superb
addition to the Futaba telemetry system, and allows any
Android enabled phone or tablet to be used to display
telemetry data from the model. Supplied complete with
mounting clip and USB adapter, the TMA-1 operates
with both T-FHSS and FASSTest transmission systems,
the real-time data being available on the phone/tablet
for a co-pilot or assistant to see. As with many Futaba
products the TMA-1 can be updated as improved
software becomes available.
TBA
Futaba SBS/01S Telemetry Sensor
Part Number: P-SBS/01S
Another first (as far as we are aware) for Futaba is this new
servo sensor, which can be connected to one or two S-Bus2
servos to monitor their operation, current consumption and
temperature whilst in operation, with the information being
shown on screen. For the first time it will be possible to see
exactly how much current is being taken by an individual
servo under actual flight loads in real-time, which will allow
more accurate servo selection and ensure that highly
stressed servos are not overloaded.
Unit Dimensions: 49 x 15 x 6mm Weight: 7g
Length: 270mm