Specifications

[e-mail]
Electric Power & Accessories
33
Includes Reverse Polarity Protection
A high quality transmitter neck strap in black made from 100% nylon6 with a 'Team Futaba' embroidered logo
in orange. Can you afford not to have a quality strap when you have invested time and money in your radio?
£9.99
Team Futaba Tx Neck Strap
Part Number: P-EBB1063
£3.75 £3.75
Ripmax MT-60 Ripmax XT-90S
Part Number: O-RAMT60 Part Number: O-RAX90S
Ripmax Aluminium Electric Motor Propeller Adaptors
This 3 pin connector is designed for use on both brushless motors
and speed controllers. Each half includes three heavy duty 3.5mm
gold plated connectors. The compact design keeps all three wires
together into one connector helping to keep your installation tidy.
These ultra heavy-duty connectors feature
4mm gold plated pins making them a must for high power electric
models. Thanks to their ingenious design, the positive connector
has an initial low current section, so that when you first plug them
half way in there is no spark. Once you press two small tabs, the
connector can be fully connected allowing full current. This system
helps to reduce the risk of a sudden power surge damage.
Max Amps: 60A Connectors: 3.5mm Gold Plated Max Amps: 90A Connectors: 4.0mm Gold Plated
E-EMPD23 Motor Propeller Adaptor Assembly 2.3mm
£3.25
E-EMPD30 Motor Propeller Adaptor Assembly 3.0mm
£4.25
E-EMPD32A Motor Propeller Adaptor Assembly A 3.2mm
£4.50
E-EMPD32B Motor Propeller Adaptor Assembly B 3.2mm
£4.50
E-EMPD40A Motor Propeller Adaptor Assembly A 4.0mm
£5.75
E-EMPD40B Motor Propeller Adaptor Assembly B 4.0mm
£5.75
E-EMPD40C Motor Propeller Adaptor Assembly C 4.0mm
£5.75
E-EMPD50 Motor Propeller Adaptor Assembly 5.0mm
£6.99
E-EMPD80 Motor Propeller Adaptor Assembly 8.0mm
£11.50
Designed to suit a wide range of electric motors, these high-quality propeller
adaptors are CNC machined from aluminium to ensure the least weight
possible but with maximum strength and accuracy. Each adaptor is the collet
type, allowing easy installation and adjustable shaft positioning. Simply tighten
the regular or domed aluminium nut to clamp the shaft. They are especially
suited to the Ripmax Quantum 2 range of motors.
• CNC Machined • High Quality Aluminium • Collet Style
Domed Nut
Self-Centring
Clamp
Hollow Nut
Knurled
Collet