Operating instructions

29
Fitting The Tool Caddy
1. Locate the two plastic headed screws beneath
the back of the unit and remove them by unscrewing
anticlockwise.
2. Hook the top front of the caddy over the two hooks
on the reverse of the Monster 60 SuperClean and
push the bottom part of the caddy under the body of
the cleaner so that the holes in the fixing lugs match
the holes for the plastic screws.
3. Re-fit the two plastic headed screws through the
fixing lugs into the two screw holes turning clockwise
until hand tight.
The Tool Caddy is now fitted to the Steam Cleaner