Instruction manual

Using Your Steam Cleaner

Steam Release

To release steam from the Steam Cleaner,

slide the Steam Control trigger found on the

Steam Gun forward. Steam will continue to be

released while the trigger is in the forward position.

To stop the steam, slide the trigger backward.

IMPORTANT NOTE: When Steam Cleaner has run out of water,

steam output will cease. Follow “Reﬁlling the Boiler During Use”

instructions on page 9 to continue using your Steam Cleaner.

ALWAYS unplug the unit and allow it to cool at least 5 minutes

before opening Boiler Cap!

Attaching Shoulder Strap

Using the detachable Shoulder Strap allows for

greater freedom of movement when both hands

are needed for cleaning tasks.

To attach Shoulder Strap to the Steam Cleaner,

simply snap Shoulder Strap hooks to the openings

found on the unit.

When using Steam Cleaner with the Shoulder

Strap, avoid rocking or tilting the unit excessively

as this may cause water to enter the hose and be

discharged along with the steam.

CAUTION: We recommend testing the weight of the Steam Cleaner

before using it with the Shoulder Strap. This is to prevent potential

injury and ensure it is not too heavy to carry comfortably.

Turning Steam Cleaner On

Plug Steam Cleaner into a 3-prong electrical outlet to turn On.

• Be sure there is water in the Boiler before plugging in.

• Attach any accessory before plugging unit in.