PRISM 3D LED ART PANELS Modular 4 Panel Starter Kit QUICK START GUIDE MLB7-1038-RGB v1.
GETTING STARTED Thank you for choosing the Prism 3D LED Art Panels by Monster Smart Illuminessence. This Quick Start Guide will help you with the installation of your add-on device. WHAT’S IN THE BOX • 2 x Prism LED panels • 2 x Prism mounting brackets with 3M Command damage-free adhesive (preinstalled on each panel) • 2 x Prism connectors • 2 x Replacement 3M Command damage-free adhesive strips • 1 x Quick Start Guide • 1 x Design Guide WHAT DO YOU NEED? This product is an ADD-ON PACK.
PREP COMPLETE SETUP BEFORE INSTALLATION STEP 1 Remove your new Prism panels and all components from the box. Note that the mounting bracket and adhesive tape will be preinstalled on each panel.
INSTALLATION STEP 1 Before installing anything, try out different shapes and patterns with your panels on the floor or a large table to decide what you would like to create! Consult the Design Guide for ideas. examples, starter kit + 1 add-on pack: IMPORTANT: • For best results, don’t disconnect the controller from the first panel that you already have installed. • To ensure all panels light up, make sure all the connectors always point the GREEN side AWAY from the controller.
STEP 3 Remove the panel, leaving the bracket in place on the wall. Press firmly on the bracket for 10 seconds to ensure a strong hold. NOTE: Once additional panels have been added, take extra care to hold down neighboring panels when removing one. PRESS FIRMLY for 10 sec STEP 4 Attach more connectors with the GREEN side out as needed for the design. Make sure to insert each connector fully into the slot.
STEP 5 With connector(s) installed, return your panel to the wall by centering it over the mounting bracket and over the open GREEN connector so it snaps into place. NOTE: Make sure all connections are secure. GREEN always points AWAY from controller connectors for next panels (green side out) STEP 6 Build out your Prism pattern by repeating these steps with more panels and connectors, moving away from the controller.
TROUBLESHOOTING HAVING TROUBLE WITH SETUP? Don’t return this product to the retailer, we’re here to help. Please call for customer support: 866-246-2008 Q: Why is my device failing to connect to my Wi-Fi network? A1: Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your device will be placed on. A2: You may first need to enable and allow location services on your phone or tablet to find nearby devices. A3: If your Wi-Fi network is a mixed 2.
NOTES WARRANTY 1 Year Limited Warranty - Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.
FCC Compliance This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy. 3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.
