型号:MS22111 Model No.: MS22111 快速指南 Quick Start Guide 请仔细阅读本快速指南并妥善保存以备将来使用。 Please read this Quick Start Guide carefully and keep it for future use. 产品概述 Product Overview • 条形音箱 • Sound bar • 电源适配器 •Power Adapter • 光学电缆 • Optical cable • AUX IN 音频线 • AUX IN audio cable • 摇控器 •remote control • AAA 1.5V 电池*2 • AAA 1.5V battery*2 • 挂墙配件 • Wall-mounted accessories • 快速指南, 保证函 •Quick Start Guide & Warranty Letter 1.电源开/关机 2.模式切换 3.上一曲 4.下一曲 5.暂停/播放/静音 6.模式切换 7.3D 音效 8.低音增强音效 9.
1. 模式切换 2. 暂停/播放/静音 3. 电源开/关机 4. 上一曲/降低音量 5. 下一曲/增大音量 1. Mode switching 2. Pause/Play/Mute 3. Power on/off 4. Previous song/Volume down 5. Next song/Volume up 通过 HDMI (ARC) 连接至电视 HDMI 连接支持数字音频，是连接条形音箱的最佳选择。如果您的电视支持 HDMI ARC，您可 以使用一根 HDMI 电缆（不包含）通过条形箱收听电视节目。 Connect to TV via HDMI (ARC) HDMI connection supports digital audio and is the best choice for connecting to a sound bar. If your TV supports HDMI ARC, you can use an HDMI cable (not included) to listen to TV programs through the sound bar.
通过模拟音频电缆连接设备 使用随附的模拟电缆连接条形音箱上的 AUX-IN（RCA 插孔） 与便携设备上的 AUX-OUT/ 3.5mm 接口。 Connect the device via an analog audio cable Use the supplied analog cable to connect the AUX-IN (RCA jack) on the sound bar to the AUX-OUT/3.5mm jack on the portable device. 开机/关机 首先将电源适配器与音箱连接好，并接通电源。在关机模式下，按住电源开/关按键大约 2 秒以开启音箱，可听到开机提示音。 关闭音箱，请再次按住电源开/关按键大约 2 秒，可听到关机提示音。 注意：接通电源时，音箱会自动开机。 Power on/off First connect the power adapter to the speaker and turn on the power.
seconds to disconnect and pair with other devices. • If the Bluetooth device is not connected, the speaker will automatically enter the pairing mode. When pairing, enable the Bluetooth function of the mobile phone, search for the "Monster" device for pairing and connection. After the connection is successful, you will hear a beep, and the white LED indicator will change from flashing to steady on.
Pairing “Discovering” Bluetooth Connected “Your device is connected” 注意 • 请确保电视机的声音输出设置为“外部扬声器”。 Caution • Make sure that the sound output of the TV is set to "external speakers". FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
