MSDS 报告号：DSP23070336-1 化学品安全技术说明书（MSDS） 委托方 Client 东莞市和锂电子科技有限公司 Dongguan Heli Electronic Technology Co., Ltd 委托方地址 Add. of Client 广东省东莞市塘厦镇塘厦环市南路 135 号 501 室 Room 501, No.135, Huanshi South Road, Tangxia Town, Dongguan City, Guangdong Province 样品名称 Description 可充电聚合物锂离子电芯 Rechargeable Polymer Li-ion Cell 型号规格 Model/Type HL 402030 标称电压 Nominal Voltage 3.7V 额定容量 Rated Capacity 150mAh 额定能量 Rated Energy 0.555Wh 制造厂 Manufacturer 东莞市和锂电子科技有限公司 Dongguan Heli Electronic Technology Co.
一． 样品信息 Sample information 可充电聚合物锂离子电 样品名称 芯 Sample Name Rechargeable Polymer Li-ion Cell 标称电压 Nominal voltage 3.7V 样品外观 Shape 二．内容与说明 棱柱形 Prismatic MSDS 报告号：DSP23070336-1 样品型号 Type 额定容量 Rated capacity HL 402030 150mAh Content and instructions 1. 化学品及企业标识 Chemical product and company identification 化学品的名称 Name of chemical product 名称 Name 地址 Address 制造商 Manufacturer 可充电聚合物锂离子电芯 Rechargeable Polymer Li-ion Cell 东莞市和锂电子科技有限公司 Dongguan Heli Electronic Technology Co.
MSDS 报告号：DSP23070336-1 2. 危险性概述 Hazards identification 1) 主要的物理及化学危险性 Important Physical and chemical hazards 在强压变形、拆解、短路时有起火爆炸与化学烧伤等危险，在高温环境或放置于火焰环境中、超负荷使用 时有起火爆炸危险. When the battery is in extreme pressure deformation, high-temperature environment, overload, short-circuit condition, or disassemble the battery, an explosion of fire and chemical burn hazards may occur. 2) 对人体健康影响 Effects of the human health.
MSDS 报告号：DSP23070336-1 铜 Copper Foil (Cu) 15 7440-50-8 丁苯橡胶 Styrene-Butadiene polymer 1.5 9003-55-8 六氟磷酸锂 /Lithium hexafluorophosphate 2.8 21324-40-3 碳酸乙烯酯 Ethylene carbonate 5 96-49-1 碳酸二甲酯 Dimelene carbonate 5 616-38-6 碳酸甲乙酯 Carbonate, methyl ethyl 5 623-53-0 镍/Nickel 2.2 7440-02-0 4.
MSDS 报告号：DSP23070336-1 pressure and direct sunlight. In the event of fire, wear gas masks and cool the adjacent batteries and control the spread of fire with water or extinguishers, separate the fire batteries with other batteries as conditions permit, let the fire naturally extinguished, otherwise put out the fire with lots of water. In normal condition the fire is not extinguished until the reactions that between the chemicals contained in the battery are completed.
MSDS 报告号：DSP23070336-1 9. 理化特性 Physical and chemical properties 物品外观与形状 Object appearance and shape 棱柱形 Prismatic 气味 Odour 无 None 10. 稳定性和反应性 Stability and reactivity 稳定性 Stability 正常环境下稳定。 Stable under the regular environment. 应避免的条件 Should avoid conditions 高温或过湿环境，撞击震动或受挤压，正负极反接使用。 High temperature, wet environment, mechanical shock, vibration, crush, reverse polarity used should be avoided.
MSDS 报告号：DSP23070336-1 该电池样品为可充电聚合物锂离子电芯,该电池型号已通过 UN38.3 测试。 This battery sample is Rechargeable Polymer Li-ion Cell and This battery type is proved to meet the Requirements tests in the UN Manual of Tests and Criteria, Part Ⅲ, subsection 38.3. 可充电聚合物锂离子电芯应满足 2023 国际航空运输协会《危险品规则》(64 版)的 3.9.2.6.1(e) 规定进行包 装空运； Rechargeable Polymer Li-ion Cell Can be transport by air according to the International Air transport Association (IATA) Dangerous Goods Regulations relevant regulations (64th) for section 3.9.2.6.
MSDS 报告号：DSP23070336-1 锂离子电池与设备包装 在一起 包装说明 PI966 的第 II 部分 可按 IMO IMDG CODE(2020 版)《国际海运危险货物规则》特殊规定第 188 条相关规定进行包装海运。 Can be transport by sea according to the special provision 188 of IMO International Maritime Dangerous Goods Code relevant regulations. 根据 IMO IMDG CODE(2020 版) 的 2.9.4.7，锂电池或电池组的制造商和生产后的销售商应提供联合国《试 验和标准手册》第 III 部分第 38.3 小节第 38.3.5 段规定的 UN38.3 试验概要； According to 2.9.4.
