User guide

Monster® GO-DJ™ | Instruction Manual | Page 76
Saving and Loading Gain Levels
You can save and load gain value for each file by pressing the buttons on the right side
of the gain slider. These buttons light up when each function is available.
You can save the gain value by touching the Save button when either of the following
conditions are met:
● For the track currently being played, a gain level value has not been previously
saved.
● The current value of the gain slider is different from the previously saved value.
You can load a saved gain value by touching the Load button.
Gain on File Loading
You can regulate the method of how the initial gain is set when a file is loaded to the
turntable on the CONTROL(2) tab in the Options screen.
In the “Reset Each Gain File” option, if the “Keep for Each File” option is selected, the
previously saved gain level is loaded. If a gain level was not previously saved, the gain
level will be set to 0 dB. If the “Reset” option is selected, then the gain level will be reset
to 0 dB. If a gain level was previously saved, the saved gain level can be loaded by
touching the Load button.